Markets for Powder Metallurgy components

auto-trans
Powder Metallurgy components used in the new 10-speed automatic transmission system developed for Ford and General Motors (Courtesy Keystone Powder Metal Company, USA)

The automotive sector

The predominant market for Press/Sinter structural Powder Metallurgy parts is the automotive sector. On average across all geographical regions, around 80% of all Powder Metallurgy structural components are for automotive applications.

Around 75% of these automotive applications are components for transmissions (automatic and manual) and for engines.

Transmission applications include:

  • Synchroniser system parts
  • Gear shift components
  • Clutch hubs
  • Planetary gear carriers
  • Turbine hubs
  • Clutch and pocket plates

Engine parts include:

  • Pulleys, sprockets and hubs, particularly those associated with the engine timing belt system
  • Valve seat inserts
  • Valve guides
  • PM lobes for assembled camshafts
  • Balancer gears
  • Main bearing caps
  • Engine manifold actuators
  • Camshaft bearing caps
  • Engine management sensor rings

Powder Metallurgy parts also find application in a range of other automotive systems:

  • Oil pumps – particularly gears
  • Shock absorbers – piston rod guides, piston valves, end valves
  • Anti-lock Braking Systems (ABS) – sensor rings
  • Exhaust systems – flanges, oxygen sensor bosses
  • Chassis components
  • Variable Valve Timing systems
  • Continuously Variable Transmissions
  • Exhaust Gas Recirculation (EGR) systems
  • Turbochargers
THE WORLD OF METAL POWDERS TO YOUR INBOX
Subscribe to our weekly newsletter
Register now

Other markets for Powder Metallurgy structural parts

Markets for Powder Metallurgy components
Rotor for petroleum fuel storage pump produced by Lovejoy Sintered Solutions LLC, of Downers Grove, USA, for Petrotec, India (Photo courtesy MPIF)

There are other important markets for Powder Metallurgy structural parts, where components are required in large production quantities. The second largest structural parts market is in DIY tools and domestic appliances.

Bearings and various gear parts are examples of Powder Metallurgy applications in DIY power tools and domestic “white goods”.

Metal-graphite carbon brushes are also used extensively in electrical motors and generators for domestic appliances, automobiles and power tools.

Other Powder Metallurgy structural part markets include:

  • Business machines
  • Leisure and garden products
  • Industrial motors and controls
  • Hardware – lock parts, latches etc.

Aerospace applications

Aero-engine and land-based gas turbine applications

Aero-engine and land-based gas turbine applications for Powder Metallurgy products require extremely good properties and the PM-based process routes in this sector generally incorporate Hot Isostatic Pressing (HIP).

For nickel-based superalloy turbine discs, processing from powders has become necessary to allow the next increments in product performance, through enhanced microstructural control and compositional capability compared with ingot-route material. The Powder Metallurgy process generally involves isothermal forging of a HIP billet, although “as-HIP” parts can also be used where creep strength is the sole design criterion.

Net-shape HIP titanium Powder Metallurgy products have been developed for turbine applications where conventional processing (involving machining) is very wasteful of material and the Powder Metallurgy route can offer cost benefits. The addition of features to forged or cast parts using powder-based additive manufacturing techniques is also being applied for similar reasons.

Airframe sector

There is also growing interest in the use of titanium Powder Metallurgy in the airframe sector, either for cost saving in applications already using wrought-route titanium or for potential weight reduction in replacing steel parts.

Oil and gas industry

In the Oil and Gas sector, hard metal and diamond cutting tools are regularly used for oil and gas exploration. HIP powder products in a range of austenitic and duplex stainless steels are also being increasingly used in off-shore applications, including manifolds and valves. HIP- and laser-cladding techniques are being used to deposit abrasion resistant coatings on a range of off-shore components.

Hardmetal and diamond cutting tools are also used for machining operations is many industrial sectors including automotive, aerospace and general engineering.

Healthcare sector

There are many devices in the healthcare sector that contain components that can be made by powder-based routes:

  • MRI scanners used large quantities of rare earth permanent magnets, processed from powders.
  • Many surgical instruments and dental implants are produced by Metal Injection Moulding.
  • There are growing interests in producing customised medical implants using additive manufacturing and in producing porous implant structures (to match bone stiffness and to aid osteo-integration) by PM processing (MIM, Press/Sinter PM etc.) of materials containing space-holder additions that are removed after forming.

Next page: Economic Considerations for PM Structural Parts | Contents page

In our latest magazine…

Download PDF

Extensive metal powder and Powder Metallurgy news coverage, plus the following exclusive deep-dive articles and reports:

  • Soft Magnetic Composites (SMCs) for electric motors: A new era driven by automotive and aviation electrification
  • Keep your powder dry: The overlooked impact of moisture in metal powders
  • PM-HIP: The alternative to casting and forging that improves supply chain flexibility and sustainability
  • Producing copper powder from industrial waste: Destiny Copper’s sustainable recovery process
  • The 2024 Japan Powder Metallurgy Association Awards: Recognising innovations in PM

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of Metal Powder Technology, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join 5,000+ other industry professionals – follow us online

Discover our magazine archive…

The free-to-access Metal Powder Technology magazine archive offers unparalleled insight into the world of metal powder from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of Metal Powder Technology magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link