Ricardo develops new electric motor to boost power and cut cost of hybrid electric vehicles

July 20, 2018

News
July 20, 2018
Ricardo develops new electric motor to boost power and cut cost of hybrid electric vehicles

The new 48V electric motor and inverter developed by Ricardo (Courtesy Ricardo)

 

Global strategic engineering and environmental consultancy Ricardo, Shoreham-by-Sea, UK, has developed a new 48-volt electric motor which it states offers up to a 50% increase in power density compared with current production machines. The motor was developed as part of a major European research initiative, the European COmpetitiveness in Commercial Hybrid and AutoMotive PowertrainS (ECOCHAMPS) project.

The new Ricardo 48V e-motor and accompanying inverter were designed to incorporate the latest thinking in high-performance, low-cost electrification, which aims to extend the performance of 48V hybrids to offer a more attractive and affordable solution in comparison with today’s higher-voltage hybrid cars. Ricardo was one of twenty-five collaborating EU commercial and academic partners on this project, the focus of which was to achieve both a 20% powertrain efficiency improvement and a 20% reduction in weight and in volume in comparison with the best-in-class full hybrid vehicles on the market at the start of the project.

In doing so, the aim was to achieve a cost premium of no more than 10% over equivalent conventional products – which is considerably less than the additional cost of current hybrid architectures. The ECOCHAMPS project – which was recently completed – focused on the hybridisation requirements of a range of vehicles from ‘C’ and ‘B’ class passenger cars, to light delivery trucks, city buses, and long-haul heavy-duty trucks. The project delivered five demonstrator vehicles – one for each of these categories – in order to demonstrate and validate the full benefits of the approach taken in creating low-cost hybrid powertrains. In addition to broadly achieving the targets set for all five vehicle classes, the ECOCHAMPS vehicles reportedly demonstrated their constituent technologies up to a Technology Readiness Level of 7.

Thomas Gutwald, Managing Director, Ricardo Innovations, stated, “Affordable hybridisation for mass market vehicle applications is likely to be key to achieving future fuel economy and CO2 emissions targets. Ricardo is pleased to have been involved in the ECOCHAMPS research initiative. The new Ricardo 48V e-motor and inverter that we have announced today is a demonstration of the very significant strides that are possible by applying the latest thinking to the engineering of electric powertrain architectures and components. We look forward to working with our partners to help pull forward the technology, which will enable automakers to create a new generation of better performing and highly cost-effective 48V hybrids that offer close to the fuel-efficiency of full hybrids at a fraction of the on-cost.”

The new design is said to combine the company’s experience gained through ECOCHAMPS and other R&D projects, as well as commercial work in developing electrified powertrain products for customers. Testing of the e-motor and inverter was carried out at Ricardo’s facilities in Shoreham-by-Sea and Cambridge, UK, on three prototype units built for the project by Ricardo. Results of these tests are expected to be published and presented at the IEEE ECCE at Portland, Oregon, USA, in September 2018. A series of presentations are set to be made on the results of the ECOCHAMPS project in China, Japan, USA, EU, India and the UK.

www.ricardo.com

www.ecochamps.eu

News
July 20, 2018

In our latest magazine…

Download PDF

Extensive metal powder and Powder Metallurgy news coverage, plus the following exclusive deep-dive articles and reports:

  • GKN Powder Metallurgy targets sustainable and resilient regional NdFeB magnet production
  • The chemistry of LiFe: The rise of LFP batteries and what it means for the iron powder industry
  • Driving sustainable innovation: HIP 2025 explores the strategic potential of Hot Isostatic Pressing
  • High-precision press solutions for permanent magnets in EVs and green energy generation
  • Powder2Powder: A closed-loop solution for high-value metal powder recycling
  • Reducing defects and energy use in Hot Isostatic Pressing: A data-driven approach to degassing

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of Metal Powder Technology, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join 5,000+ other industry professionals – follow us online

Discover our magazine archive…

The free-to-access Metal Powder Technology magazine archive offers unparalleled insight into the world of metal powder from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of Metal Powder Technology magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • HIP Services
  • AM Machines
  • Consulting & toll sintering
View online
Share via
Copy link